Sentry CR105 Manual descarregar pdf (Página 12)

U7698E Flame Detector

Part 334614E

E 2002 Nordson Corporation

Manual 34-49

Installation

WARNING: Allow only qualified personnel to perform the following tasks.

Follow the safety instructions in this document and all other related

documentation.

Mounting

See Figure 3.

1. Measure and mark the locations in the booth entrance and exit

vestibules (2) for the detector heads (1).

2. Mount the detector heads to the spray booth entrance and exit vestibule

walls or floors, using the mounting brackets (7) and screws, flat

washers, lock washers, and nuts (8).

3. Align the detector head centerlines (4) so they have an unobstructed

view of the spray guns (3), conveyor (5), hangers, and workpieces (6).

Each detector head has an 80-degree, cone-shaped field of view.

4. Mount the indicator panel close to or on the booth electrical panel or on

an operator platform using the mounting holes on the panel flanges.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 33 34

Sem comentários

Sentry CR105 Manual Página 12